Learn / Resources / Presentation recordings

56 resources found

Electromagnetics PRESENTER:Cleef Thackwell EXPERTISE:Electromagnetics Software:JMAG In order to accurately predict the energy consumption of electrically-excited synchronous motors (EESM) for automotive applications, a fine resolution sweep of id,iq and if is required to generate the dataset used to find the optimum control set-point. PWM-effects on copper and iron losses must also be considered, especially at low-load […]

Software :
Resources
10 / 10 / 2023

Presentation recordings

Electromagnetics PRESENTER:Dr. W. Hackmann EXPERTISE:Electromagnetics Software:JMAG Electrical machines in traction applications are operated in inverter-fed operation over wide speed ranges. The special demands on compactness and high efficiencies of those e-machines lead to high expectations on the FEA simulation accuracies. Here important aspects are described and a sequence of defined measurements for a proper correlation […]

Software :
Resources
10 / 10 / 2023

Presentation recordings

Electromagnetics PRESENTER:Yiwen MA EXPERTISE:Electromagnetics Software:JMAG In this keynote presentation, we explore the challenges of simulating Axial Flux Machines (AFM) in high-speed traction drive applications using JMAG. The discussion will focus on the computational hurdles and resource-intensive nature of 3D simulations, in contrast to multi-layer 2D approaches. Special attention is given to the intricacies of calculating […]

Software :

Electromagnetics PRESENTER:Philipp MORITZ EXPERTISE:Electromagnetics Software:JMAG The trend towards higher voltages is omnipresent in modern drive systems. As a result, the demands on the materials and insulation systems of the winding system are also constantly increasing. With electrostatic 2 and 3D JMAG simulations, the electric field strengths in the slot, at the slot exit and in […]

Software :
Resources
10 / 10 / 2023

Presentation recordings

Electromagnetics PRESENTER:Mohamed Essam Ahmed EXPERTISE:Electromagnetics Software:JMAG The study covers coupled optimization of active electromagnetic components (such as magnets, copper, and lamination) and passive electric components (e.g., insulation paper, winding coating and wedges) in electric machines. The insulation system of the electric machine acts as an EMC transfer path that influences electromagnetic compatibility and safety as […]

Software :
Resources
09 / 28 / 2022

Presentation recordings

Electromagnetics PRESENTER:Joel Wenger EXPERTISE:Electromagnetics Software:JMAG The design process for these efficiency and power-density driven optimizations is very evolved and highly application specific. For electric machine optimization, JMAG Designer, and especially the scripting capability, plays a crucial role in our design process. Related technical presentations

Software :
Resources
09 / 28 / 2022

Presentation recordings

Electromagnetics PRESENTER:Richard Csaba KovacsVilmos Paiss EXPERTISE:Electromagnetics Software:JMAG If d-q model and FEM Coil Inductance methods are not feasible to determine the proper inductances of synchronous machines, then the differential inductance must be calculated directly. The differential self- and mutual inductances can be derived by stored energy methods. This presentation shows how the required inductances can […]

Software :
Resources
09 / 28 / 2022

Presentation recordings

Electromagnetics PRESENTER:Andreas Carlsson EXPERTISE:Electromagnetics Software:JMAG The presentation will focus on concept development of hairpin wound E-motors for E-mobility and showing the importance of the Jmag optimization tools in early concept studies. Related technical presentations

Software :
Resources
09 / 28 / 2022

Presentation recordings

Electromagnetics PRESENTER:Shahin AsgariAnnette Mütze EXPERTISE:Electromagnetics Software:JMAG The motor’s design is explained in detail and, for proof of concept, investigations in the no-load and load conditions are performed using finite element analyses. In addition, important design considerations are discussed. The findings confirm the practicality of the proposed low-cost and straightforward motor topology. Related technical presentations

Software :
Resources
09 / 28 / 2022

Presentation recordings

Electromagnetics PRESENTER:Guillermo Regidor EXPERTISE:Electromagnetics Software:JMAG In this presentation we will discuss the validation in JMAG of the control and dynamics of a linear switched reluctance motor, including electromagnetic analysis of the whole machine, linear movement and power electronics simplification. Related technical presentations

Software :
Resources
09 / 28 / 2022

Presentation recordings

Electromagnetics PRESENTER:Mustafa Duyar EXPERTISE:Electromagnetics Software:JMAG Multi-body dynamics simulation used to predict excitations of an electric powertrain including electromagnetic forces calculated by commercial software JMAG. Seamless integration of multi-body dynamics, electromagnetics, and acoustic radiation prediction along with creation of audible sound files were demonstrated for the NVH assessment of electric powertrains. Related technical presentations

Software :
Resources
09 / 27 / 2022

Presentation recordings

Electromagnetics PRESENTER:Bernd Cebulski EXPERTISE:Electromagnetics Software:JMAG EV Motors driven by voltage source inverters can suffer from a variety of different failure mechanisms.From the influence of the functional safety behavior of the entire drive system, the decrease of performance and efficiency or lead to excessive noise. This paper will provide some approaches and examples of failure simulations […]

Software :
Resources
09 / 27 / 2022

Presentation recordings

Electromagnetics PRESENTER:Zoltán Nádudvari EXPERTISE:Electromagnetics Software:JMAG The industry poses specific challenges for the development engineers due to the strict requirements and design boundary conditions. Developing an electrical drive train which meets the high safety standards, the desired efficiency and power to weight ratio requires a multidisciplinary design approach to cover all of the requirements and design […]

Software :
Resources
10 / 01 / 2021

Presentation recordings

Electromagnetics PRESENTER:Peter Stopp EXPERTISE:Electromagnetics Software:JMAG While these analyses may typically be managed by different engineers, or even different departments, there is a growing need for increased collaboration. This presentation will detail several avenues for increased collaboration of motor integration to improve NVH behavior. Related technical presentations

Software :
Resources
09 / 30 / 2021

Presentation recordings

Electromagnetics PRESENTER:Dr. Björn DeusingerProf. Andreas Binder EXPERTISE:Electromagnetics Software:JMAG The availability of unprocessed field solution data obtained by JMAG allows for custom post-processing steps. In this sense, the export functionality of the JMAG GeneralInterface allows for another option to integrate JMAG into the automated processing chain for the motor design by providing inter alia the vector […]

Software :
Resources
09 / 30 / 2021

Presentation recordings

Electromagnetics PRESENTER:Amedeo Vannini EXPERTISE:Electromagnetics Software:JMAG The analysis and design of large synchronous machines featuring both magnets and squirrel cage using both analytical and simulation models is presented, investigating steady-state conditions as well as start-up transients under different assumptions about the grid. Related technical presentations

Software :
Resources
09 / 30 / 2021

Presentation recordings

Electromagnetics PRESENTER:Nirmalya PanigrahiVinayak Gupta EXPERTISE:Electromagnetics Software:JMAG The losses due to eddy currents in permanent magnets of a motor, have significant impact on the magnet temperature and its performance. While designing Battery electric vehicles (BEVs) this can influence the range and the cooling system for the motor assembly. The rare-earth magnets have higher conductivities which leads […]

Software :
Resources
09 / 29 / 2021

Presentation recordings

Electromagnetics PRESENTER:Vladimir Semin EXPERTISE:Electromagnetics Software:JMAG In the presentation, a possible approach for easily assigning electrical winding configuration to an existing geometry is proposed: The method uses the JMAG’s built-in script editor, as well as coupling with an external software tool for winding generating. Related technical presentations

Software :
Resources
09 / 29 / 2021

Presentation recordings

Electromagnetics PRESENTER:Yves Thioliere EXPERTISE:Electromagnetics Software:JMAG In the V20.2 several improvements have been implemented concerning the efficiency maps analysis such as outputting an RT file from the efficiency map, including the magnets Eddy current loss calculation in the speed priority mode, reduce the modelling time in the conversion workflow from speed priority to accuracy priority mode. […]

Software :
Resources
09 / 29 / 2021

Presentation recordings

Electromagnetics PRESENTER:Didier Zefack EXPERTISE:Electromagnetics Software:JMAG The effect of temperature, stress and deformation can be accounted for through a coupled analysis using a 2D model for magnetic field analysis and structural analysis, and a 3D model for thermal analysis Related technical presentations

Software :
Resources
09 / 29 / 2021

Presentation recordings

Electromagnetics PRESENTER:Michele Merelli EXPERTISE:Electromagnetics Software:JMAG Market requirements and the need for reduced emissions are pushing the demand for hybrid and electric traction both in the transportation and in the off-highway sectors. Over the next years e-drive units and e-axles will continue to evolve to meet industry specific requirements like increase in power density, efficiency improvement, […]

Software :
Resources
09 / 29 / 2021

Presentation recordings

Electromagnetics PRESENTER:Elia Cipolato & Didier Zefack EXPERTISE:Electromagnetics Software:JMAG In recent years, the use of motors has been increasing in many industries due to environmental concerns. Especially in automotive industry, as the shift to electric vehicles (EVs) accelerates globally, the demands of developing motors has requested them to be smaller, more efficient, and safer.One of the […]

Software :
Resources
09 / 28 / 2021

Presentation recordings

Electromagnetics PRESENTER:Ahmed Shoeb EXPERTISE:Electromagnetics Software:JMAG A new interface specialized in motor design is now available. Designers can investigate design proposal using JMAG-Express. Modelling and calculation are performed by JMAG-Designer in accordance with input design parameters, and calculation results are displayed in JMAG-Express. Related technical presentations

Software :
Resources
09 / 27 / 2021

Presentation recordings

Electromagnetics PRESENTER:Shafigh Nategh EXPERTISE:Electromagnetics Software:JMAG As shown in presentation, proper rotor design can significantly improve the risk of demagnetization allowing short-circuit in larger operation range. In addition, obtaining an acceptable level of performance and efficiency as using rare earth elements is possible to achieve. This has been enabled using advanced JMAG Optimization functions incorporating different […]

Software :
Resources
09 / 27 / 2021

Presentation recordings

Electromagnetics PRESENTER:Nejat Saed EXPERTISE:Electromagnetics Software:JMAG This explains the widespread structure-borne noise observed with sub-fractional HP machines, also reflected in extensive experimental investigations. The analyses also explore how dynamic eccentricity can counteract non-uniform magnetization and vice versa. Related technical presentations

Software :
Resources
09 / 27 / 2021

Presentation recordings

Electromagnetics PRESENTER:Ji Qi EXPERTISE:Electromagnetics Software:JMAG Consequent pole (CP) permanent magnet (PM) machines have attracted considerable interest as a means of reducing machine cost through a marked reduction in the volume of permanent magnet required to meet a particular torque specification. However, the presence of a large torque ripple that can result from the CPPM structure […]

Software :
Resources
07 / 18 / 2021

Presentation recordings

Electromagnetics PRESENTER:HBX EXPERTISE:Electromagnetics Software:JMAG All-electric aviation is increasingly at the forefront of research and development with the promise of zero-carbon air travel and a 40% reduction in operating costs for short-haul flights. According to the Advanced Research Projects Agency-Energy (ARPA-E), a propulsion system efficiency greater than 93% and specific power greater than 12 kW/kg is […]

Software :
Resources
07 / 10 / 2021

Presentation recordings

Electromagnetics PRESENTER:Mohanraj Muthusamy EXPERTISE:Electromagnetics Software:JMAG This presentation analyses the electromagnetic simulation of 36 slot 6 pole series hybrid variable flux machine (VFM) using JMAG software. The series hybrid VFM with series rare-earth and AlNiCo magnets shows the benefits of high-power capability at high speeds, more stable magnet operation at full load and lower magnetization current […]

Software :
Resources
07 / 10 / 2021

Presentation recordings

Electromagnetics PRESENTER:Dave Farnia EXPERTISE:Electromagnetics Software:JMAG When designing an electric machine, there’s more to consider than just performance. What materials are used in the stator and rotor, component testing, cost at high volumes, mechanical tolerances, etc. This presentation will discuss some practical manufacturing considerations for high performance motor design. Related technical presentations

Software :
Resources
07 / 10 / 2021

Presentation recordings

Electromagnetics PRESENTER:Dheeraj Bobba EXPERTISE:Electromagnetics Software:JMAG Realize high output density is required to develop EV traction motors, and conventional experience-based and existing product improvements are becoming unable to reach such higher requirement.Optimization is required to meet higher requirements, and a wide range of design space must be explored all over. Related technical presentations

Software :
Resources
07 / 10 / 2021

Presentation recordings

Electromagnetics PRESENTER:Dheeraj Bobba EXPERTISE:Electromagnetics Software:JMAG During this presentation from Hexagon simulation experts, we will demonstrate how software such as scFLOW, Romax and Actran can be used in conjunction with JMAG to predict the electric motor performances. Related technical presentations

Software :
Resources
07 / 01 / 2021

Presentation recordings

Electromagnetics PRESENTER:Sainan Xue EXPERTISE:Electromagnetics Software:JMAG In designing traction motors for electric vehicles, it is not only the performance of the motor itself that is evaluated, but also the energy consumption (electric vehicle fuel consumption) and distance while the vehicle is being driven. Related technical presentations

Software :
Resources
07 / 01 / 2021

Presentation recordings

Electromagnetics PRESENTER:Jonathan Zeman EXPERTISE:Electromagnetics Software:JMAG While these analyses may typically be managed by different engineers, or even different departments, there is a growing need for increased collaboration. This presentation will detail several avenues for increased collaboration of motor integration to improve NVH behavior. Related technical presentations

Software :
Resources
05 / 03 / 2021

Presentation recordings

Electromagnetics PRESENTER:Zakirul Islam EXPERTISE:Electromagnetics Software:JMAG This study projects similar efficiency improvement for a synchronous reluctance motor drive in the WLTP. Those improvements enable reduced battery size and increased range while lowering total energy consumed, and do not require hardware changes to the motor or vehicle. Related technical presentations

Software :
Resources
10 / 08 / 2020

Presentation recordings

Electromagnetics PRESENTER:Dr. Sebastian Schöps EXPERTISE:Electromagnetics Software:JMAG This presentation deals with freeform shape optimization of electric machines using the spline-based isogeometric analysis. The optimisation workflow is integrated in JMAG via geometry import and export. Related technical presentations

Software :
Resources
10 / 07 / 2020

Presentation recordings

Electromagnetics PRESENTER:Dr. Stefan Leitner EXPERTISE:Electromagnetics Software:JMAG The increasing performance requirements on automotive auxiliary drives have led to a paradigm shift in the design of sub-fractional horsepower brushless direct current (BLDC) motors. While minimum cost used to be the primary design criteria, thereby accepting sub-optimal motor behavior, their overall performance is gaining in importance. Related technical […]

Software :
Resources
10 / 06 / 2020

Presentation recordings

Electromagnetics PRESENTER:H K Shashikiran EXPERTISE:Electromagnetics Software:JMAG The topic will discuss a framework utilizing integrated modeling approach to link electromagnetics and structural stability into optimization framework, to enhance know how of the design topology, its boundaries and acceptance. Related technical presentations

Software :
Resources
10 / 05 / 2020

Presentation recordings

Electromagnetics PRESENTER:Petar Gartner EXPERTISE:Electromagnetics Software:JMAG In this talk we demonstrate Typhoon’s ultra-high fidelity motor drive Hardware in the Loop (HIL) simulation with seamless integration with JMAG FEA machine design software. Related technical presentations

Software :
Resources
10 / 05 / 2020

Presentation recordings

Electromagnetics PRESENTER:Takashi Yamada EXPERTISE:Electromagnetics Software:JMAG This presentation will detail the present and future of JMAG. JMAG is constantly being worked on to achieve highly accurate and high-speed simulation. JSOL would like to share our progress from the past year including parallel solvers to accelerate speed as well as GUI improvements aiming for increased productivity of […]

Software :
Resources
10 / 05 / 2020

Presentation recordings

Electromagnetics PRESENTER:Shafigh Nategh EXPERTISE:Electromagnetics Software:JMAG lectrification has now extended from Rail to Marine and Automotive industries. Additionally, electrified aerospace has shown the potential to be a trend in the near future. In this presentation, some of the key JMAG functions and their applicability together with some practical examples will be reviewed. Related technical presentations

Software :
Resources
10 / 05 / 2020

Presentation recordings

Electromagnetics PRESENTER:Dr. Yu Wang EXPERTISE:Electromagnetics Software:JMAG This presentation determines the existence criterion of UMF on both open-circuit and on-load conditions by analysis of air gap field and magnetic force waves, together with FE validation. Related technical presentations

Software :
Resources
10 / 05 / 2020

Presentation recordings

Electromagnetics PRESENTER:Juan Marcano EXPERTISE:Electromagnetics Software:JMAG This presentation will take you through the necessary steps to create in a simple way a template that can be used to generate a specific geometry. The process can be then applied to the desired model to create your own templates in the future. Related technical presentations

Software :
Resources
10 / 05 / 2020

Presentation recordings

Electromagnetics PRESENTER:Ahmed Sheob EXPERTISE:Electromagnetics Software:JMAG This presentation presents techniques of electromagnetic field analysis to simulate the behavior of the electric machine during driving. By means of co-simulation of finite element analysis and control/ circuit simulation, it is possible to simulate current waveforms at driving. Related technical presentations

Software :
Resources
07 / 29 / 2020

Presentation recordings

Electromagnetics PRESENTER:Ho Yin (David) Wong EXPERTISE:Electromagnetics Software:JMAG This presentation will present the design, analysis, and experimental testing results for a 5.67:1 Halbach rotor magnetic gearbox with a ferromagnetic back support. Using JMAG 3-D finite element analysis software the Halbach magnetic gearbox was calculated to achieve… Related technical presentations

Software :
Resources
07 / 29 / 2020

Presentation recordings

Electromagnetics PRESENTER:Ved Acharya EXPERTISE:Electromagnetics Software:JMAG JMAG-RT generates a high fidelity plant model. Since the model is still numerically based, it can solve very quickly. And since it is based on Finite Element Model results, it will not sacrifice accuracy to achieve this calculation speed. Related technical presentations

Software :
Resources
07 / 29 / 2020

Presentation recordings

Electromagnetics PRESENTER:Joe Wimmer EXPERTISE:Electromagnetics Software:JMAG In the era of vehicle electrification, a multi-physics, whole-system approach to vehicle modeling is paramount for success. In this presentation, Gamma Technologies will show how GT and JMAG tools can be jointly used throughout the vehicle development process to solve key challenges of vehicle electrification. Related technical presentations

Software :
Resources
07 / 29 / 2020

Presentation recordings

Electromagnetics PRESENTER:Sainan Xue EXPERTISE:Electromagnetics Software:JMAG In JMAG-Designer Ver.19.1, we continue to enhance the essential of our FEA engine – mesher and solver. The analysis parameter view (APV) and dashboard which was implemented in v19.0 have also been updated for easier use. The optimization, efficiency maps, and multi-phase modeling empowers innovative product designs. More than 10 […]

Software :
Resources
07 / 28 / 2020

Presentation recordings

Electromagnetics PRESENTER:Nanjun Tang EXPERTISE:Electromagnetics Software:JMAG The performance improvements of electric machines equipped with such a winding, including a more sinusoidal airgap magnetic field distribution and the torque ripple reduction, are verified by finite element analysis (FEA) simulations carried out with JMAG. Related technical presentations

Software :
Resources
07 / 28 / 2020

Presentation recordings

Electromagnetics PRESENTER:Maged Ibrahim EXPERTISE:Electromagnetics Software:JMAG A novel interior permanent magnet synchronous motor design comprising alternate layers of Permanent Magnet (PM) and Soft Magnetic Composite (SMC) was developed. The fabrication of the proposed design by cold spray additive manufacturing allows to eliminate the bridges and center-posts that are usually present in laminated interior PM rotors fabricated […]

Software :
Resources
07 / 01 / 2020

Presentation recordings

Electromagnetics PRESENTER:Prof. Miller EXPERTISE:Electromagnetics Software:JMAG This talk is about parasitic torques and noise in the induction motor. It’s a personal view. This technical presentation may seem rather low-key. That’s because I’m trying to encourage calm reflection of rather abstract topics, even though this is a very practical subject. Related technical presentations

Software :
Resources
07 / 01 / 2020

Presentation recordings

Electromagnetics PRESENTER:Dwaipayan Barman EXPERTISE:Electromagnetics Software:JMAG This presentation analyzes the electromagnetic simulation of a 27 slot 6 pole variable flux machine (VFM) using the JMAG software. The VFM uses AlNiCo9 magnets in which the magnetization level can be easily changed due to lower coercive force when compared to the rare-earth magnets. Related technical presentations

Software :
Resources
06 / 01 / 2020

Presentation recordings

Electromagnetics PRESENTER:Prof. Miller EXPERTISE:Electromagnetics Software:JMAG Prof. Miller begins by reviewing the entire family of electric machines, uncovering the theoretical and manufacturing reasons why machines are built and used as they are today. He draws particular attention to the unity of the family of AC drives, which includes the asynchronous induction motor and the brushless PM […]

Software :
Resources
06 / 01 / 2020

Presentation recordings

Electromagnetics PRESENTER:Prof. Miller EXPERTISE:Electromagnetics Software:JMAG In this video Prof. Miller explains the close relationship between the circuit theory, the control theory, and the field theory of electric machines.After a brief review of the nature of performance calculations, we see how the concept of the space-vector unifies the physical principles and the control methods for DC […]

Software :

How can we help you ?

Contact us

Subscribe to the

newsletter

Revolutionize e-design – Accelerate electrification