Suppression of Torque Ripple for Consequent Pole PM Machine
Electromagnetics
PRESENTER:
Ji Qi
EXPERTISE:
Electromagnetics
Software:
JMAG
Consequent pole (CP) permanent magnet (PM) machines have attracted considerable interest as a means of reducing machine cost through a marked reduction in the volume of permanent magnet required to meet a particular torque specification. However, the presence of a large torque ripple that can result from the CPPM structure can hinder their adoption in some applications, especially for the dominant third order torque ripple.
Related technical presentations
Presentation recordings
0 (0) Electromagnetics PRESENTER:Cleef Thackwell EXPERTISE:Electromagnetics Software:JMAG In order to accurately predict the energy consumption of electrically-excited synchronous motors (EESM) for automotive applications, a fine resolution sweep of id,iq and if is required to generate the dataset used to find the optimum control set-point. PWM-effects on copper and iron losses must also be considered, especially […]
Presentation recordings
5 (1) Electromagnetics PRESENTER:Dr. W. Hackmann EXPERTISE:Electromagnetics Software:JMAG Electrical machines in traction applications are operated in inverter-fed operation over wide speed ranges. The special demands on compactness and high efficiencies of those e-machines lead to high expectations on the FEA simulation accuracies. Here important aspects are described and a sequence of defined measurements for a […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Yiwen MA EXPERTISE:Electromagnetics Software:JMAG In this keynote presentation, we explore the challenges of simulating Axial Flux Machines (AFM) in high-speed traction drive applications using JMAG. The discussion will focus on the computational hurdles and resource-intensive nature of 3D simulations, in contrast to multi-layer 2D approaches. Special attention is given to the intricacies […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Mariam Ahmed SANCHEZ-TORRES EXPERTISE:Electromagnetics Software:JMAG This work demonstrates a Valeo’s approach to electric machine optimization starting from the vehicle requirements level. Related technical presentations How useful was this post? Click on a star to rate it! Submit Rating Average rating 0 / 5. Vote count: 0 No votes so far! Be the […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Philipp MORITZ EXPERTISE:Electromagnetics Software:JMAG The trend towards higher voltages is omnipresent in modern drive systems. As a result, the demands on the materials and insulation systems of the winding system are also constantly increasing. With electrostatic 2 and 3D JMAG simulations, the electric field strengths in the slot, at the slot exit […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Mohamed Essam Ahmed EXPERTISE:Electromagnetics Software:JMAG The study covers coupled optimization of active electromagnetic components (such as magnets, copper, and lamination) and passive electric components (e.g., insulation paper, winding coating and wedges) in electric machines. The insulation system of the electric machine acts as an EMC transfer path that influences electromagnetic compatibility and […]
0 (0) Electromagnetics PRESENTER:Joel Wenger EXPERTISE:Electromagnetics Software:JMAG The design process for these efficiency and power-density driven optimizations is very evolved and highly application specific. For electric machine optimization, JMAG Designer, and especially the scripting capability, plays a crucial role in our design process. Related technical presentations How useful was this post? Click on a star […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Richard Csaba KovacsVilmos Paiss EXPERTISE:Electromagnetics Software:JMAG If d-q model and FEM Coil Inductance methods are not feasible to determine the proper inductances of synchronous machines, then the differential inductance must be calculated directly. The differential self- and mutual inductances can be derived by stored energy methods. This presentation shows how the required […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Andreas Carlsson EXPERTISE:Electromagnetics Software:JMAG The presentation will focus on concept development of hairpin wound E-motors for E-mobility and showing the importance of the Jmag optimization tools in early concept studies. Related technical presentations How useful was this post? Click on a star to rate it! Submit Rating Average rating 0 / 5. […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Shahin AsgariAnnette Mütze EXPERTISE:Electromagnetics Software:JMAG The motor’s design is explained in detail and, for proof of concept, investigations in the no-load and load conditions are performed using finite element analyses. In addition, important design considerations are discussed. The findings confirm the practicality of the proposed low-cost and straightforward motor topology. Related technical […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Guillermo Regidor EXPERTISE:Electromagnetics Software:JMAG In this presentation we will discuss the validation in JMAG of the control and dynamics of a linear switched reluctance motor, including electromagnetic analysis of the whole machine, linear movement and power electronics simplification. Related technical presentations How useful was this post? Click on a star to rate […]
Presentation recordings
0 (0) Electromagnetics PRESENTER:Mustafa Duyar EXPERTISE:Electromagnetics Software:JMAG Multi-body dynamics simulation used to predict excitations of an electric powertrain including electromagnetic forces calculated by commercial software JMAG. Seamless integration of multi-body dynamics, electromagnetics, and acoustic radiation prediction along with creation of audible sound files were demonstrated for the NVH assessment of electric powertrains. Related technical presentations […]
How useful was this post?
Click on a star to rate it!
Average rating 0 / 5. Vote count: 0
No votes so far! Be the first to rate this post.
